Home › Vehicle Interior › LIGHTING (INT) › LIGHTING SYSTEM

LIGHTING SYSTEM > SYSTEM DESCRIPTION

for Preparation Click here



ILLUMINATED ENTRY SYSTEM
  1. The illuminated entry system has the following control functions:

    Control
    Outline
    Lights that Operate
    Actuation Area-linked*1
    When a registered key enters any actuation area around the doors, the lights that operate turn on.
    1. Power Switch Illumination
    2. Personal Light
    When a registered key leaves all of the actuation areas around the doors, the lights that operate turn off.
    Door Lock/Unlock-linked
    When any door is unlocked, the lights that operate turn on.
    1. Power Switch Illumination*1
    2. Personal Light
    When all doors are locked, the lights that operate turn off.
    Door Open/Close-linked
    When any door is opened, the lights that operate turn on.
    1. Power Switch Illumination*1
    2. Personal Light
    When all doors are closed, the lights that operate turn off.
    Power Switch-linked*1
    When the power switch is turned from on (ACC or IG) to off, the lights that operate turn on.
    1. Power Switch Illumination
    2. Personal Light
    When the power switch is turned from off to on (ACC or IG), the lights that operate turn off.
    Ignition Switch-linked*2
    When the ignition switch is turned from ON (IG) or ACC to off, the lights that operate turn on.
    1. Personal Light
    When the ignition switch is turned from off to ON (IG) or ACC, the lights that operate turn off.
    Delay
    When approximately 15 seconds elapse after any of the following conditions is met, the lights that operate turn off:
    1. An actuation area-linked function is used.*1
    2. The door unlock-linked function is active.
    3. Any door is opened and then all doors are closed when the ignition switch is off.
    1. Power Switch Illumination*1
    2. Personal Light
    Battery Saving
    When 20 minutes elapse after the ignition switch is turned from ACC or ON (IG) to off and the lights that operate remain on, the lights are turned off.

    HINT:
    Battery saving control is canceled when any of the following operations is performed before the lights are turned off by battery saving control. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off.
    1. The ignition switch is turned to ACC or ON (IG)
    2. Any door is opened and closed
    3. The back door is opened and closed
    4. Any door is unlocked
    5. The key enters any exterior actuation area

    1. Power Switch Illumination*1
    2. Personal Light
    3. Luggage Compartment Light*3

    1. *1: w/ Smart Key System
    2. *2: w/o Smart Key System
    3. *3: w/ Luggage Compartment Light