Home › Power Source / Network › NETWORKING › CAN COMMUNICATION SYSTEM

CAN COMMUNICATION SYSTEM > SYSTEM DIAGRAM

for Preparation Click here



OVERALL CAN BUS DIAGRAM


  1. Control system CAN is composed of 2 buses.


    C260157E01


    Text in Illustration 
    *A
    w/ Smart Key System
    *B
    for Radio and Display Type
    *1
    V Bus
    *2
    Sub Bus 15
    *3
    V Bus Terminating Resistor
    *4
    Sub Bus 15 Terminating Resistor
    *5
    ECM
    (for V Bus and Sub Bus 15)
    *6
    Main Body ECU (Multiplex Network Body ECU)
    (for V Bus)
    *7
    Airbag Sensor Assembly
    (for V Bus)
    *8
    Spiral Cable with Sensor Sub-assembly (Steering Sensor)
    (for V Bus)
    *9
    Power Steering ECU Assembly
    (for V Bus)
    *10
    Air Conditioning Amplifier Assembly
    (for V Bus)
    *11
    Power Management Control ECU
    (for V Bus and Sub Bus 15)
    *12
    Smart Key ECU Assembly (Certification ECU)
    (for V Bus)
    *13
    Brake Booster with Master Cylinder Assembly (Skid Control ECU)
    (for V Bus and Sub Bus 15)
    *14
    DLC3
    (for V Bus)
    *15
    Radio and Display Receiver Assembly
    (for V Bus)
    *16
    Combination Meter Assembly
    (for V Bus)

HINT:
Refer to the following bus wiring diagrams for details.


V BUS

C251130E02


C260158E02

HINT:
The CAN communication system connects to other network via ECUs that function as a gateway (Click here).


SUB BUS 15

C260159E03