Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER

REAR BUMPER > REASSEMBLY

for Preparation Click here



1. INSTALL REAR BUMPER SIDE SEAL LH


    B297208
  1. Install the rear bumper side seal LH with the 2 clips.



2. INSTALL REAR BUMPER SIDE SEAL RH

HINT:
Use the same procedure as for the LH side.



3. INSTALL REAR BUMPER ARM SUB-ASSEMBLY LH


    B307351
  1. Install the rear bumper arm sub-assembly LH with the 3 bolts.

    Torque:
    19 N*m{ 194 kgf*cm , 14 ft.*lbf }



4. INSTALL REAR BUMPER ARM SUB-ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.



5. INSTALL NO. 1 REAR BUMPER REINFORCEMENT


    B307350
  1. Install the No. 1 rear bumper reinforcement with the 4 bolts.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }



6. INSTALL UPPER REAR BUMPER RETAINER LH


    B307358
  1. Engage the 2 claws and install the upper rear bumper retainer LH.

  1. Install the screw.



7. INSTALL UPPER REAR BUMPER RETAINER RH

HINT:
Use the same procedure as for the LH side.



8. INSTALL REAR BUMPER SIDE RETAINER LH


    B297206
  1. Engage the guide and 2 claws and install the rear bumper side retainer LH.

  1. Install the screw.



9. INSTALL REAR BUMPER SIDE RETAINER RH

HINT:
Use the same procedure as for the LH side.