Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE PEDAL

BRAKE PEDAL > DISASSEMBLY

for Preparation Click here



1. REMOVE BRAKE PEDAL SUB-ASSEMBLY


    C250005
  1. Remove the brake pedal shaft and nut to remove the brake pedal sub-assembly from the brake pedal support sub-assembly.



2. REMOVE BRAKE PEDAL BUSHING
  1. Remove the 2 brake pedal bushings from the brake pedal sub-assembly.



3. REMOVE BRAKE PEDAL SHAFT COLLAR
  1. Remove the brake pedal shaft collar from the brake pedal sub-assembly.



4. REMOVE BRAKE PEDAL PAD