DTC U0122 Lost Communication with Vehicle Dynamics Control Module |
| DTC No. | DTC Detection Condition | Trouble Area |
| U0122 | While ignition switch is ON, communication stop between brake booster with master cylinder (skid control ECU) and power management control ECU continues for 2.6 seconds or more |
|
| 1.CHECK CAN COMMUNICATION SYSTEM |
Connect the Techstream to the DLC3.
Select "Bus Check" from the "System Select".
Select "DTC" from the "Bus Check" screen, and then select "Enter".
| Result | Proceed to |
| CAN communication system DTC is not output | A |
| CAN communication system DTC is output | B |
|
| ||||
| A | ||
| ||