Home › Power Source / Network › NETWORKING › LIN COMMUNICATION SYSTEM

LIN COMMUNICATION SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



CHECK DTC
  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch ON (IG).

  3. Turn the Techstream on.

  4. Enter the following menus: Body Electrical / Smart Key*, Power Source Control* or Main Body / Trouble Codes.

    1. *: w/ Smart Key System

  5. Check the details of the DTC(s) (Click here).


CLEAR DTC
  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch ON (IG).

  3. Turn the Techstream on.

  4. Enter the following menus: Body Electrical / Smart Key*, Power Source Control* or Main Body / Trouble Codes.

    1. *: w/ Smart Key System

  5. Clear the DTC(s).