Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING ECU

POWER STEERING ECU > INSTALLATION

for Preparation Click here



1. INSTALL POWER STEERING ECU ASSEMBLY


    C248049
  1. Install the power steering ECU assembly with the 2 nuts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }



    C248048
  1. Connect the 4 connectors to the power steering ECU assembly.



2. INSTALL UPPER INSTRUMENT PANEL ASSEMBLY



3. TORQUE SENSOR ZERO POINT CALIBRATION
(Click here)


4. ASSIST MAP WRITING
(Click here)