FRONT SEATBACK HEATER > REMOVAL |
| 1. REMOVE FRONT SEAT ASSEMBLY |
| 2. REMOVE RECLINING ADJUSTER RELEASE HANDLE |
![]() |
Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the reclining adjuster release handle.
| *1 | Protective Tape |
| 3. REMOVE VERTICAL ADJUSTING HANDLE (for Driver Side) |
![]() |
Remove the screw and vertical adjusting handle.
| 4. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER |
![]() |
Disconnect the rubber band of the separate type front seatback cover.
| 5. REMOVE FRONT SEAT CUSHION SHIELD |
![]() |
Remove the screw.
![]() |
Disengage the 2 claws, 4 guides and clip to remove the front seat cushion shield.
| 6. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Driver Side) |
![]() |
Disengage the 2 claws and 4 guides to remove the front seat inner cushion shield.
| 7. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side) |
![]() |
Disengage the 3 claws and 6 guides to remove the front seat inner cushion shield.
| 8. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD |
![]() |
Remove the 5 hog rings.
![]() |
Remove the 3 hog rings.
![]() |
Turn back the separate type front seatback cover.
![]() |
Remove the 2 nuts and the 3 brackets.
![]() |
Disengage the 4 claws and remove the 2 front seat headrest supports.
Remove the separate type front seatback cover with pad.
| 9. REMOVE SEPARATE TYPE FRONT SEATBACK COVER |
![]() |
Remove the 6 hog rings and separate type front seatback cover from the separate type front seatback pad.
| 10. REMOVE FRONT SEATBACK HEATER ASSEMBLY |
![]() |
Remove the 12 tag pins to remove the front seatback heater assembly from the separate type front seatback cover.