FRONT SEAT CUSHION HEATER > REMOVAL |
| 1. REMOVE FRONT SEAT ASSEMBLY |
| 2. REMOVE RECLINING ADJUSTER RELEASE HANDLE |
![]() |
Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the reclining adjuster release handle.
| *1 | Protective Tape |
| 3. REMOVE VERTICAL ADJUSTING HANDLE (for Driver Side) |
![]() |
Remove the screw and vertical adjusting handle.
| 4. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER |
![]() |
Disconnect the rubber band of the separate type front seatback cover.
| 5. REMOVE FRONT SEAT CUSHION SHIELD |
![]() |
Remove the screw.
![]() |
Disengage the 2 claws, 4 guides and clip to remove the front seat cushion shield.
| 6. REMOVE FRONT SEAT LOWER CUSHION SHIELD (for Driver Side) |
![]() |
Disengage the 2 claws to remove the front seat lower cushion shield.
| 7. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Driver Side) |
![]() |
Disengage the 2 claws and 4 guides to remove the front seat inner cushion shield.
| 8. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side) |
![]() |
Disengage the 3 claws and 6 guides to remove the front seat inner cushion shield.
| 9. SEPARATE FRONT SEAT AIRBAG ASSEMBLY |
![]() |
Disengage the fastener and separate the front seat airbag assembly wire harness.
for Driver Side:
![]() |
Disengage the claw and 6 clamps to separate the front seat airbag assembly wire harness.
for Front Passenger Side:
![]() |
Disengage the claw and 3 clamps to separate the front seat airbag assembly wire harness.
| 10. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD |
for Driver Side:
![]() |
Disengage the 4 clamps to separate the seat heater wire harness.
for Front Passenger Side:
![]() |
Disengage the claw and 3 clamps to separate the seat heater wire harness.
![]() |
Disconnect the connector.
Disengage the clamp.
![]() |
Disengage each hook and remove the separate type front seat cushion cover with pad.
| 11. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER |
![]() |
Remove the 2 hog rings.
![]() |
Remove the 18 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.
| 12. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY |
![]() |
Remove the 12 tag pins to remove the front seat cushion heater assembly from the separate type front seat cushion cover.