Home › Vehicle Exterior › WINDOW / GLASS › REAR POWER WINDOW SWITCH

REAR POWER WINDOW SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY
  1. Engage the 2 claws to install the rear power window regulator switch assembly to the rear upper door armrest base panel.



2. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL
  1. Connect the connector.



    B307129
  1. Engage the 3guides and 8 claws to install the rear power window regulator switch assembly with rear door armrest base panel.



3. INSPECT POWER WINDOW OPERATION
(Click here)