Home › Steering › STEERING COLUMN › STEERING PAD SWITCH

STEERING PAD SWITCH > REMOVAL

for Preparation Click here



1. REMOVE HORN BUTTON ASSEMBLY
(Click here)


2. REMOVE STEERING PAD SWITCH ASSEMBLY
  1. Disconnect the steering pad switch connector from the spiral cable.



    C206250
  1. Remove the 2 screws.

  1. Disengage the 2 claws to remove the steering pad switch assembly (RH side) from the steering wheel sub-assembly.



    C206251
  1. Remove the 2 screws.

  1. Disengage the 2 claws to remove the steering pad switch assembly (LH side) from the steering wheel sub-assembly.



3. REMOVE STEERING PAD SWITCH LH


    C258055
  1. Remove the clamp.

  1. Disconnect the connector to remove the steering pad switch LH from the steering pad switch RH.