Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR (for Front Side)

WASHER MOTOR (for Front Side) > REMOVAL

for Preparation Click here



1. REMOVE FRONT WHEEL RH


2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH


    E238033
  1. Remove the 2 screws and front wheel opening extension pad RH.



3. REMOVE FRONT FENDER LINER RH


    E238034
  1. Remove the 3 screws.



    E238036
  1. Remove the 4 grommets.



    E238035
  1. Remove the 7 clips and front fender liner RH.



4. DRAIN WINDSHIELD WASHER FLUID


    E237555
  1. Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.

    HINT:
    Use a container to collect the washer fluid.



5. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    E237556
  1. Disconnect the connector.

  1. Remove the windshield washer motor and pump assembly as shown in the illustration.



6. REMOVE WINDSHIELD WASHER JAR BUSH


    E237557
  1. Remove the windshield washer jar bush from the windshield washer jar.