DTC B1610/13 Front Airbag Sensor RH Malfunction |
| DTC No. | DTC Detection Condition | Trouble Area |
| B1610/13 |
|
|
| 1.CHECK FRONT AIRBAG SENSOR RH |
![]() |
Turn the ignition switch off.
Disconnect the cable from the negative (-) auxiliary battery terminal.
Interchange the front airbag sensor RH with LH and connect the connectors.
Connect the cable to the negative (-) auxiliary battery terminal.
Clear the DTCs stored in memory (Click here).
Turn the ignition switch off.
Turn the ignition switch to ON (IG), and wait for at least 60 seconds.
Check for DTCs (Click here).
| Result | Proceed to |
| DTCs B1610/13 and B1615/14 are not output. | A |
| DTC B1610/13 is output. | B |
| DTC B1615/14 is output. | C |
Turn the ignition switch off.
Disconnect the cable from the negative (-) auxiliary battery terminal.
Return the front airbag sensor RH and LH to their original positions and connect the connectors.
| *1 | Front Airbag Sensor LH |
| *2 | Airbag Sensor Assembly |
|
| ||||
|
| ||||
| A | ||
| ||