PERSONAL LIGHT > INSTALLATION |
| 1. INSTALL MAP LIGHT BULB |
Install the 2 map light bulbs to the map light assembly.
| 2. INSTALL OUTER ROOM LIGHT LENS (w/o Sliding Roof) |
Engage the 6 claws to install the outer room light lens.
| 3. INSTALL OUTER ROOM LIGHT LENS (w/ Sliding Roof) |
Engage the 6 claws to install the outer room light lens.
Engage the 6 claws to install the map light sub-assembly to the roof console panel.
| 4. INSTALL MAP LIGHT ASSEMBLY (w/o Sliding Roof) |
Connect the connector.
![]() |
Engage the 4 claws to install the map light assembly.
| *a | Contact Portion |
| 5. INSTALL MAP LIGHT ASSEMBLY (w/ Sliding Roof) |
Connect the connector.
![]() |
Engage the 4 clips to install the map light assembly.
| *a | Contact Portion |