Home › Vehicle Interior › LIGHTING (INT) › PERSONAL LIGHT

PERSONAL LIGHT > REMOVAL

for Preparation Click here



1. REMOVE MAP LIGHT ASSEMBLY (w/o Sliding Roof)


    E236388E01
  1. Using a moulding remover, disengage the 4 claws.
    Text in Illustration 
    *a
    Contact Portion

    NOTICE:
    Do not touch the metal plates, especially the contact portions, as it may cause a malfunction such as the light does not illuminate.

  1. Disconnect the connector and remove the map light assembly.



2. REMOVE MAP LIGHT ASSEMBLY (w/ Sliding Roof)


    E241082E01
  1. Using a moulding remover, disengage the 4 clips.
    Text in Illustration 
    *a
    Contact Portion

    NOTICE:
    Do not touch the metal plates, especially the contact portions, as it may cause a malfunction such as the light does not illuminate.

  1. Disconnect the connector and remove the map light assembly.



3. REMOVE OUTER ROOM LIGHT LENS (w/o Sliding Roof)


    E236394
  1. Disengage the 6 claws and remove the outer room light lens.



4. REMOVE OUTER ROOM LIGHT LENS (w/ Sliding Roof)


    E241084
  1. Disengage the 6 claws and remove the map light sub-assembly from the roof console panel.



    E241085
  1. Disengage the 6 claws and remove the outer room light lens.



5. REMOVE MAP LIGHT BULB
  1. Remove the 2 map light bulbs from the map light assembly.