REAR COMBINATION LIGHT ASSEMBLY > INSTALLATION |
| 1. INSTALL REAR COMBINATION LIGHT ASSEMBLY |
Engage the grommet.
![]() |
Engage the guide and 2 pins to temporarily install the rear combination light assembly.
| *1 | Pin |
| *2 | Guide |
| *3 | Rear Combination Light Guide |
| *4 | No. 2 Rear Combination Light Guide |
Install the rear combination light assembly with the 2 bolts.
w/o Package Tray Trim:
Pull the deck trim side panel assembly until the connector of the rear combination light assembly can be seen.
Connect the connector.
Install the deck trim side panel assembly with the 2 clips.
w/ Package Tray Trim:
Pull the deck trim side panel assembly until the connector of the rear combination light assembly can be seen.
Connect the connector.
Engage the 2 clips to install the deck trim side panel assembly.
Install the bolt.