Home › Vehicle Exterior › LIGHTING (EXT) › LICENSE PLATE LIGHT ASSEMBLY

LICENSE PLATE LIGHT ASSEMBLY > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure described below is for the LH side.



1. INSTALL LICENSE PLATE LIGHT BULB
  1. Install the license plate light bulb to the housing.



2. INSTALL LICENSE PLATE LIGHT LENS
  1. Engage the 2 claws to install the license plate light lens to the housing.



3. INSTALL LICENSE PLATE LIGHT PACKING
  1. Install a new license plate light packing.



4. INSTALL LICENSE PLATE LIGHT ASSEMBLY
  1. Engage the 2 claws to install the license plate light assembly.

  1. Connect the connector.



5. INSTALL BACK DOOR TRIM BOARD ASSEMBLY


    B297006
  1. Install the back door trim assembly with the 10 clips.