LICENSE PLATE LIGHT ASSEMBLY > REMOVAL |
| 1. REMOVE BACK DOOR TRIM BOARD ASSEMBLY |
![]() |
Remove the 10 clips and back door trim board assembly.
| 2. REMOVE LICENSE PLATE LIGHT ASSEMBLY |
![]() |
Disconnect the connector.
Disengage the 2 claws and remove the license plate light assembly.
| 3. REMOVE LICENSE PLATE LIGHT PACKING |
Remove the license plate light packing.
| 4. REMOVE LICENSE PLATE LIGHT LENS |
![]() |
Using a screwdriver, disengage the 2 claws and remove the license plate light lens from the housing.
| 5. REMOVE LICENSE PLATE LIGHT BULB |
Remove the license plate light bulb from the housing.