Home › Vehicle Exterior › LIGHTING (EXT) › HIGH MOUNTED STOP LIGHT ASSEMBLY

HIGH MOUNTED STOP LIGHT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL CENTER STOP LIGHT SET
  1. Secure the wire running through the rear spoiler assembly to the center stop light set wire harness.

  1. Pull the wire to pass the center stop light set wire harness through the rear spoiler assembly.

    NOTICE:
    Do not apply excess force when pulling the wire harness or it may break.

  1. Install the center stop light set with the 2 screws to the rear spoiler assembly.

  1. Remove the wire from the center stop light set wire harness.

  1. Connect the connector.



2. INSTALL REAR LIGHT COVER
  1. Engage the 2 claws and connect the connector to the rear right cover.

  1. Engage the 6 claws to install the rear right cover.