Home › Vehicle Exterior › LIGHTING (EXT) › HIGH MOUNTED STOP LIGHT ASSEMBLY

HIGH MOUNTED STOP LIGHT ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE REAR LIGHT COVER


    E237721
  1. Disengage the 6 claws.



    E237722
  1. Disengage the 2 claws to remove the rear light cover.



2. REMOVE CENTER STOP LIGHT SET


    E237723
  1. Disconnect the connector.



    E237724E01
  1. Secure a wire around the center stop light set wire harness as shown in the illustration.
    Text in Illustration 
    *1
    Wire

    NOTICE:
    Use a wire long enough so that the center stop light set wire harness can be passed through the rear spoiler assembly during installation.

  1. Remove the 2 screws.

  1. Pull the center stop light set and wire harness to remove the center stop light set.

    NOTICE:
    Do not apply excess force when pulling the wire harness or it may break.

  1. Remove the wire from the old center stop light set wire harness.