Home › Audio / Visual / Telematics › AUDIO / VIDEO › MICROPHONE (w/o Sliding Roof)

MICROPHONE (w/o Sliding Roof) > REMOVAL

for Preparation Click here



1. REMOVE ROOF HEADLINING ASSEMBLY
(Click here)


2. REMOVE ROOF HEADLINING RETAINER COVER


    E244886
  1. Disconnect the connector.



    E237172
  1. Disengage the 4 claws and remove the roof headlining retainer cover.



3. REMOVE AMPLIFIER MICROPHONE ASSEMBLY


    E237173
  1. Disengage the 2 claws and remove the amplifier microphone assembly from the roof headlining holder cover.