Home › Steering › STEERING GEAR / LINKAGE › STEERING GEAR

STEERING GEAR > DISASSEMBLY

for Preparation Click here



1. REMOVE STEERING RACK BOOT CLIP (for LH Side)
  1. Using pliers, remove the steering rack boot clip.



2. REMOVE STEERING RACK BOOT CLIP (for RH Side)

HINT:
Perform the same procedure as for the LH side.



3. REMOVE NO. 2 STEERING RACK BOOT CLAMP


    C110164
  1. Using a screwdriver, remove the No. 2 steering rack boot clamp.

    NOTICE:
    Be careful not to damage the No. 2 steering rack boot.



4. REMOVE NO. 1 STEERING RACK BOOT CLAMP

HINT:
Perform the same procedure as for the No. 2 steering rack boot clamp.



5. REMOVE NO. 2 STEERING RACK BOOT


6. REMOVE NO. 1 STEERING RACK BOOT