Home › Vehicle Interior › LIGHTING (INT) › BACK DOOR COURTESY SWITCH

BACK DOOR COURTESY SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL BACK DOOR LOCK ASSEMBLY

HINT:
Make sure to remove the string before installing a new back door lock assembly.

  1. Apply MP grease to the sliding parts of the back door lock assembly.

  1. Install the back door lock assembly with the 2 bolts.

    Torque:
    7.5 N*m{ 76 kgf*cm , 66 in.*lbf }

  1. Connect the connector.



2. INSTALL BACK DOOR TRIM BOARD ASSEMBLY


    B297006
  1. Install the back door trim assembly with the 10 clips.