SEAT BELT WARNING SYSTEM > CUSTOMIZE PARAMETERS |
| 1. CUSTOMIZE SEAT BELT WARNING SYSTEM |
Customizing with the Techstream
Connect the Techstream to the DLC3.
Turn the ignition switch ON (IG).
Turn the Techstream on.
Enter the following menus: Customize Setting / Warning.
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
| Driver Side Seatbelt Warning Buzzer | ON | Function to sound the driver seat belt warning buzzer | OFF/ON | Combination meter assembly |
| Front Passenger Side Seatbelt Warning Buzzer | ON | Function to sound the front passenger seat belt warning buzzer | OFF/ON |