Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM

METER / GAUGE SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here



1. CUSTOMIZE METER / GAUGE SYSTEM
  1. Customizing with the Techstream

    1. Connect the Techstream to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the Techstream on.

    4. Enter the following menus: Customize Setting / Warning.

    5. Select the setting by referring to the table below.

      NOTICE:
      1. Be sure to record the current value before customizing.


      Warning 
      Tester Display
      Default
      Content
      Setting
      Relevant ECU
      Key Remind Sound
      Slow
      Function to change the cycle of the key remind warning buzzer
      Normal, Slow, Fast
      Combination meter assembly
      Driver Side Seatbelt Warning Buzzer
      ON
      Function to turn on/off the seat belt warning buzzer
      ON or OFF
      Combination meter assembly
      Front Passenger Side Seatbelt Warning Buzzer
      ON
      Function to turn on/off the seat belt warning buzzer
      ON or OFF
      Combination meter assembly

  1. Customizing with the combination meter assembly

    HINT:
    1. Press and hold the DISP switch to enter an item.
    2. Briefly press the DISP switch to select an item.


    1. Turn the power switch on (IG).

    2. Enter the following menus: SETTINGS.

    3. Select the setting by referring to the table below.

      NOTICE:
      1. Be sure to record the current value before customizing.


      Basic Settings 
      Combination meter assembly display
      Default
      Content
      Setting
      Relevant ECU
      Date
      -
      To adjust the date
      -
      Combination meter assembly
      Clock
      -
      To adjust the date
      -
      Combination meter assembly
      Clock Mode
      24H
      To select the clock mode
      24H or 12H
      Combination meter assembly
      Steering Switch
      -
      To select the steering pad switch display
      OFF or ON
      Combination meter assembly
      Language
      English
      To select the language
      English, Spanish, French
      Combination meter assembly

      Set ECO Savings 
      Combination meter assembly display
      Default
      Content
      Setting
      Relevant ECU
      Gasoline Price
      *1
      To select the gasoline price
      $/gal. or $/L
      Combination meter assembly
      Fuel Cons. Comparison
      *1
      To select the fuel consumption unit
      MPG or L/100km
      Combination meter assembly
      ECO Savings
      Basic
      To select the eco savings display setting
      Basic or Details
      Combination meter assembly
      1. *1: Changes according to the vehicle specification

      Menu Screen Selection 
      Combination meter assembly display
      Default
      Content
      Setting
      Relevant ECU
      ECO Savings Record
      OFF
      Display or not display eco savings record
      OFF or ON
      Combination meter assembly
      5 min. consumption
      OFF
      Display or not display 5 minutes fuel consumption
      OFF or ON
      Combination meter assembly
      Past Record
      OFF
      Display or not display fuel consumption record
      OFF, Monthly Avg. or Own Best
      Combination meter assembly

      Screen Off 
      Combination meter assembly display
      Default
      Content
      Setting
      Relevant ECU
      Screen Off
      -
      Display or not display the selected item
      -
      Combination meter assembly

      Set Clock 
      Combination meter assembly display
      Default
      Content
      Setting
      Relevant ECU
      Hour
      -
      To adjust the hour
      -
      Combination meter assembly
      Minute
      -
      To adjust the minute
      -
      Combination meter assembly
      Second
      -
      To adjust the second
      -
      Combination meter assembly

    4. Press and hold the DISP switch.

    5. Return to the item selection screen.