Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM

LIGHTING SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here



1. CUSTOMIZE LIGHTING SYSTEM (EXT)

HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Customizing with the Techstream

    1. Connect the Techstream to the DLC3.

    2. Turn the ignition switch to ON (IG).

    3. Turn the Techstream on.

    4. Enter the following menus: Body Electrical / Main Body / Utility / Customize / Light Control.

    5. Select the setting by referring to the table below.

      Light Control 
      Display
      Default
      Content
      Setting
      Relevant ECU
      DRL Function*1
      ON
      ON/OFF of the DRL function
      ON or OFF
      Main Body ECU (Multiplex Network Body ECU)

      1. *1: Headlight dimmer switch w/ DRL OFF function

  1. Customizing with the multi-display

    1. Turn the ignition switch to ON (IG).

    2. Enter the following menus: SETUP / Vehicle.

    3. Select the setting by referring to the table below.

      Vehicle Settings 
      Display
      Default
      Content
      Setting
      Relevant ECU
      Daytime Running Lights*1
      On
      ON/OFF of the DRL function
      On or Off
      Main Body ECU (Multiplex Network Body ECU)

      1. *1: Headlight dimmer switch w/ DRL OFF function