Home › Audio / Visual / Telematics › AUDIO / VIDEO › MICROPHONE (w/ Sliding Roof)

MICROPHONE (w/ Sliding Roof) > INSTALLATION

for Preparation Click here



1. INSTALL TELEPHONE MICROPHONE ASSEMBLY
  1. Engage the 2 claws and install the telephone microphone assembly.

  1. Install the the printed circuit board sub-assembly with the 4 screws.

  1. Connect the connector.



2. INSTALL MAP LIGHT ASSEMBLY
  1. Connect the connector.



    E241083E01
  1. Engage the 4 clips to install the map light assembly.
    Text in Illustration 
    *a
    Contact Portion

    NOTICE:
    Do not touch the metal plates, especially the contact portions, as it may cause a malfunction such as the light does not illuminate.