Home › Audio / Visual / Telematics › AUDIO / VIDEO › MICROPHONE (w/ Sliding Roof)

MICROPHONE (w/ Sliding Roof) > REMOVAL

for Preparation Click here



1. REMOVE MAP LIGHT ASSEMBLY


    E241082E01
  1. Using a moulding remover, disengage the 4 clips.
    Text in Illustration 
    *a
    Contact Portion

    NOTICE:
    Do not touch the metal plates, especially the contact portions, as it may cause a malfunction such as the light does not illuminate.

  1. Disconnect the connector and remove the map light assembly.



2. REMOVE TELEPHONE MICROPHONE ASSEMBLY


    E237175
  1. Disconnect the connector.

  1. Remove the 4 screws and remove the printed circuit board sub-assembly.



    E237176
  1. Disengage the 2 claws and remove the telephone microphone assembly.