VEHICLE PROXIMITY NOTIFICATION SYSTEM > CUSTOMIZE PARAMETERS |
| 1. CUSTOMIZE VEHICLE PROXIMITY NOTIFICATION SYSTEM |
Customizing with the Techstream
Connect the Techstream to the DLC3.
Turn the ignition switch on (IG).
Turn the Techstream on.
Enter the following menus: Body Electrical / Vehicle Proximity Notification System / Utility / Customize Setting / Others.
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
| Proximity Sound Volume Adjustment | Standard | Function that sets the warning sound volume in 3 levels | Standard, Standard +1, Standard +2 | Vehicle Approaching Speaker Controller |
| Proximity Sound Level Increase (Vehicle Starting) | ON | Function that amplifies the warning sound when the vehicle starts off | ON or OFF | Vehicle Approaching Speaker Controller |
| Proximity Sound Control (Vehicle Stationary) | OFF | Function that sets the warning sound when the vehicle is stopped | ON or OFF | Vehicle Approaching Speaker Controller |