Home › Vehicle Interior › HEATING / AIR CONDITIONING › PTC HEATER ASSEMBLY

PTC HEATER ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY
(Click here)


2. REMOVE STEERING COLUMN ASSEMBLY
(Click here)


3. REMOVE QUICK HEATER ASSEMBLY


    E238256
  1. Remove the bolt and disconnect the earth wire.

  1. Disengage the clamp.



    E238255
  1. Disconnect the connector.

  1. Disengage the clamp.

  1. Remove the 2 screws and the quick heater assembly.