Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL SWITCH

DOOR CONTROL SWITCH > REMOVAL

for Preparation Click here



1. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)


    B307078
  1. Disengage the 10 claws and 4 guides.

  1. Disconnect the connector and remove the power window regulator master switch assembly with front door armrest base panel.



2. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)


    B307079
  1. Disengage the 10 claws and 4 guides.

  1. Disconnect the connector and remove the power window regulator switch assembly with front door armrest base panel.



3. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for Driver Side)


  1. w/ Rear Power Window:



      B301065
    1. Remove the 3 screws and power window regulator master switch assembly.



  1. w/o Rear Power Window:



      B301064
    1. Remove the 3 screws and power window regulator master switch assembly.



4. REMOVE DOOR CONTROL SWITCH ASSEMBLY (for Front Passenger Side)


    B301066
  1. Disengage the 2 claws and remove the door control switch assembly.