Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION ECU

NAVIGATION ECU > INSTALLATION

for Preparation Click here



1. INSTALL EXTENSION MODULE
  1. Connect the connector to install the extension module.

  1. Connect the 3 connectors to install the navigation wire.



2. INSTALL NO. 1 RADIO RECEIVER BRACKET
  1. Install the No. 1 radio receiver bracket with the 3 screws.



3. INSTALL NO. 2 RADIO RECEIVER BRACKET
  1. Install the No. 2 radio receiver bracket with the 3 screws.



4. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET
  1. Connect each connector.

  1. Engage the 2 guides to the vehicle body to temporarily install the radio and display receiver assembly with bracket.

  1. Install the radio and display receiver assembly with bracket with the 4 screws.



5. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    B301682
  1. Engage the claw and 8 clips to install the center instrument cluster finish panel sub-assembly.