Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY

FRONT SEAT INNER BELT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL FRONT SEAT BELT ANCHOR PLATE
  1. Install the front seat belt anchor plate.



2. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)


    B309595E01
  1. Install the front seat inner belt assembly with the nut.
    Text in Illustration 
    *1
    Protruding Part

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

  1. Engage the 2 clamps.

  1. Engage each clamp under the front seat assembly.



3. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)


    B309596E01
  1. Install the front seat inner belt assembly with the nut.
    Text in Illustration 
    *1
    Protruding Part

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

  1. Engage the clamp.

  1. Engage each clamp under the front seat assembly.



4. INSTALL FRONT SEAT INNER CUSHION SHIELD (w/ Removable Headrest)
for Driver Side:
for Front Passenger Side:


5. INSTALL FRONT SEAT INNER CUSHION SHIELD (w/ Non-removable Headrest)
for Driver Side:
for Front Passenger Side:


6. INSTALL FRONT SEAT ASSEMBLY (w/ Removable Headrest)
(Click here)


7. INSTALL FRONT SEAT ASSEMBLY (w/ Non-removable Headrest)
(Click here)