Home › Vehicle Interior › INTERIOR PANELS / TRIM › UPPER INSTRUMENT PANEL

UPPER INSTRUMENT PANEL > DISASSEMBLY

for Preparation Click here



1. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY


    B308106
  1. Disengage the 3 clips and remove the No. 1 instrument panel register assembly.



2. REMOVE NO. 1 SIDE DEFROSTER NOZZLE


    B308108
  1. Using a moulding remover, disengage the 4 claws and remove the No. 1 side defroster nozzle.



3. REMOVE NO. 2 SIDE DEFROSTER NOZZLE


    B308109
  1. Using a moulding remover, disengage the 4 claws and remove the No. 2 side defroster nozzle.



4. REMOVE NO. 1 HEATER TO REGISTER DUCT ASSEMBLY


    B301694
  1. Remove the 3 screws <B> and No. 1 heater to register duct assembly.



5. REMOVE NO. 2 HEATER TO REGISTER DUCT ASSEMBLY


    B301696
  1. Remove the 3 screws <B> and No. 2 heater to register duct assembly.



6. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT


    B301695
  1. Remove the 3 screws <B> and No. 1 side defroster nozzle duct from the No. 1 heater to register duct.



7. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT


    B301697
  1. Remove the 3 screws <B> and No. 2 side defroster nozzle duct from the No. 2 heater to register duct.



8. REMOVE NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)


  1. Remove the 2 screws.


    E237170

  1. Disengage the 5 clamps and remove the navigation antenna assembly.



9. REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY

CAUTION:
When storing the instrument panel passenger airbag assembly, keep the airbag deployment side facing upward.



    B300219
  1. Disengage the clamp from the upper instrument panel assembly.



    B300220
  1. Disengage the clamp to separate the No. 2 instrument panel wire from the instrument panel passenger airbag assembly.



    B300221
  1. Remove the 2 screws.



    B300222
  1. Lean the upper instrument panel assembly and disengage the 3 hooks.



    B300223
  1. Disengage the 3 hooks to remove the instrument panel passenger airbag assembly from the upper instrument panel assembly.



10. REMOVE FINISH PANEL MOUNTING BRACKET


    B297469
  1. Remove the 2 screws <B> and finish panel mounting bracket.

    HINT:
    Use the same procedure for the RH and LH sides.



11. REMOVE NO. 1 INSTRUMENT PANEL CUSHION


  1. Remove the 4 No. 1 instrument panel cushions.


    B301698



12. REMOVE NO. 2 INSTRUMENT PANEL CUSHION


    B301699
  1. Remove the No. 2 instrument panel cushion.



13. REMOVE INSTRUMENT PANEL CUSHION


  1. Remove the instrument panel cushion.


    B301700



  1. Remove the instrument panel cushion.


    B301701



14. REMOVE NO. 5 INSTRUMENT PANEL CUSHION


    B301702
  1. Remove the No. 5 instrument panel cushion.