Home › Vehicle Interior › INTERIOR PANELS / TRIM › UPPER INSTRUMENT PANEL

UPPER INSTRUMENT PANEL > REASSEMBLY

for Preparation Click here



1. INSTALL NO. 5 INSTRUMENT PANEL CUSHION


    B301703E01
  1. Align the marking lines on the upper instrument panel with the ends of a new No. 5 instrument panel cushion and install the No. 5 instrument panel cushion as shown in the illustration.
    Text in Illustration 
    *1
    Marking Line



2. INSTALL INSTRUMENT PANEL CUSHION


  1. Align the marking lines on the upper instrument panel with the ends of a new instrument panel cushion and install the instrument panel cushion as shown in the illustration.


    B301704E01


    Text in Illustration 
    *1
    Marking Line
    -
    -



  1. Align the marking lines on the upper instrument panel with the ends of the instrument panel cushion and install a new instrument panel cushion as shown in the illustration.


    B301705E01


    Text in Illustration 
    *1
    Marking Line
    -
    -



3. INSTALL NO. 2 INSTRUMENT PANEL CUSHION


    B301699
  1. Using hot-melt glue, install a new No. 2 instrument panel cushion.



4. INSTALL NO. 1 INSTRUMENT PANEL CUSHION


  1. Using hot-melt glue, install 4 new No. 1 instrument panel cushions.


    B301698



5. INSTALL FINISH PANEL MOUNTING BRACKET


    B297469
  1. Install the finish panel mounting bracket with the 2 screws <B>.

    HINT:
    Use the same procedure for the RH and LH sides.



6. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System)
  1. Engage the 5 clamps.

  1. Install the navigation antenna assembly with the 2 screws.



7. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY
  1. Engage the 3 hooks.

  1. Push the instrument panel passenger airbag assembly to engage the 3 hooks.

  1. Install the 2 screws to install the instrument panel passenger airbag assembly.

  1. Engage the clamp to the instrument panel passenger airbag assembly.

  1. Engage the clamp to the upper instrument panel assembly.



8. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT


    B301697
  1. Install the No. 2 side defroster nozzle duct to the No. 2 heater to register duct with the 3 screws <B>.



9. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT


    B301695
  1. Install the No. 1 side defroster nozzle duct to the No. 1 heater to register duct with the 3 screws <B>.



10. INSTALL NO. 2 HEATER TO REGISTER DUCT ASSEMBLY


    B301696
  1. Install the No. 2 heater to register duct assembly with the 3 screws <B>.



11. INSTALL NO. 1 HEATER TO REGISTER DUCT ASSEMBLY


    B301694
  1. Install the No. 1 heater to register duct assembly with the 3 screws <B>.



12. INSTALL NO. 2 SIDE DEFROSTER NOZZLE


    B308110
  1. Engage the 4 claws to install the No. 2 side defroster nozzle.



13. INSTALL NO. 1 SIDE DEFROSTER NOZZLE


    B308107
  1. Engage the 4 claws to install the No. 1 side defroster nozzle.



14. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY


    B308106
  1. Engage the 3 clips to install the No. 1 instrument panel register assembly.