Home › Vehicle Interior › INTERIOR PANELS / TRIM › LOWER INSTRUMENT PANEL

LOWER INSTRUMENT PANEL > REASSEMBLY

for Preparation Click here



1. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL SEAL


    B307696
  1. Engage the 3 claws and guide.



    B307695
  1. Engage the 2 claws as shown in the illustration.



    B307693
  1. Install the No. 1 instrument cluster finish panel seal with the clip.



2. INSTALL SPARE SWITCH HOLE COVER (w/o Smart Key System)


    B307692
  1. Engage the 2 claws to install the spare switch hole cover.



3. INSTALL POWER SWITCH (w/ Smart Key System)
  1. Connect the power switch connector.

  1. Engage the 2 claws to install the power switch.



4. INSTALL NO. 1 POWER OUTLET SOCKET COVER


    E240054
  1. Align the protrusion of the No. 1 power outlet socket cover with the cutout of the lower instrument panel.

  1. Engage the 2 claws and install the No. 1 power outlet socket cover.



5. INSTALL NO. 1 POWER OUTLET SOCKET ASSEMBLY


    E240055
  1. Align the protrusion of the No. 1 power outlet socket assembly with the cutout of the No. 1 power outlet socket cover and install the No. 1 power outlet socket.



    E240056
  1. Turn the No. 1 power outlet socket assembly counterclockwise and securely engage the claw.

  1. Connect the connector.



6. INSTALL GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY


    B307697
  1. Engage the claw to install the glove compartment door stopper sub-assembly.