Home › Vehicle Interior › INTERIOR PANELS / TRIM › FRONT CONSOLE BOX

FRONT CONSOLE BOX > DISASSEMBLY

for Preparation Click here



1. REMOVE CONSOLE CUP HOLDER BOX (w/o Console Box Lid)


    B297433
  1. Disengage the 7 claws and remove the console cup holder box as shown in the illustration.



2. REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY (w/ Console Box Lid)


    B297432
  1. Remove the 2 screws.



    B297430
  1. Disengage the 9 claws and remove the console compartment door sub-assembly as shown in the illustration.



3. REMOVE CONSOLE BOX HOLE COVER (w/ Console Box Lid)


    B297428E01
  1. Using a screwdriver, disengage the 4 claws and remove the 2 console box hole covers.
    Text in Illustration 
    *1
    Protective Tape

    HINT:
    Tape the screwdriver tip before use.



4. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY (w/ Console Box Lid)


    B297427
  1. Remove the 5 screws.



    B297426
  1. Disengage the 7 claws and remove the rear console end panel sub-assembly.



5. REMOVE UPPER NO. 1 BOX PLATE (w/ Console Box Lid)


    B297423
  1. Disengage the 8 claws.



    B297420
  1. Pull the upper No. 1 box plate in the direction indicated by the arrow to disengage the 4 guides and remove the upper No. 1 box plate.



6. REMOVE CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY (w/ Console Box Lid)
  1. Remove the 2 screws and console compartment door lock sub-assembly.



7. REMOVE CONSOLE COMPARTMENT DOOR CUSHION (w/ Console Box Lid)


    B297424E01
  1. Using needle-nose pliers, disengage the 2 clips to remove the 2 console compartment door cushions.
    Text in Illustration 
    *1
    Protective Tape

    HINT:
    Tape the tip of the needle-nose pliers before use.