Home
›
Engine / Hybrid System
›
1NZ-FXE LUBRICATION
›
OIL PUMP
OIL PUMP > INSTALLATION > Preparation
SST
09213-58012
Crankshaft Pulley Holding Tool
(91111-50845)
Bolt
09330-00021
Companion Flange Holding Tool
09550-60010
Differential Side Bearing
Replacer
(09951-00250)
Replacer 25
(09951-00380)
Replacer 38
(09952-06010)
Adapter
09950-70010
Handle Set
EQUIPMENT
Wooden block
-
Protective tape
-
Oil pressure gauge
-
Torque wrench
-
Feeler gauge
-
LUBRICANT / Standard Oil Grade
Oil Grade
Oil Viscosity (SAE)
ILSAC multigrade engine oil
0W-20
LUBRICANT / Standard Capacity
Item
Standard Condition
Drain and refill with oil filter change
3.7 liters (3.9 US qts, 3.3 Imp. qts)
Drain and refill without oil filter change
3.4 liters (3.6 US qts, 3.0 Imp. qts)
Dry fill
4.1 liters (4.3 US qts, 3.6 Imp. qts)
RECOMMENDED TOOLS
09010-3C110
Set, Hexagon Socket Wrench
-
(09013-6C120)
Socket Hexagon
8mm
-
09012-2C520
Deep Socket Wrench
24mm
-
09080-1C111
Toyota Electrical Tester Set
-
09080-2C101
Test Lead Set
-
SSM
Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent
-
Toyota Genuine Seal Packing Block, Three Bond 1207B or equivalent
-