AUDIO AND VISUAL SYSTEM > DETAILS



FUNCTION
  1. Bluetooth Audio System

    1. The functions of the Bluetooth audio system that can be used vary with the version of the Audio/Video Remote Control Profile (AVRCP) supported by the Bluetooth audio player that is being used.

    2. The functions of the Bluetooth audio system are as follows:

      Function
      Outline
      Audio/Video Remote Control Profile (AVRCP)
      Version 1.0
      Version 1.3 or higher
      Play
      Starts playing the music
      X
      X
      Stop
      Stops playing the music.
      X
      X
      Pause
      Pauses the music.
      X
      X
      Track Up/Down
      Changes the track.
      X
      X
      Fast Up/Down
      Fast-forwards or reverses
      X
      X
      Album Up/Down
      Changes the album.
      -
      X
      Repeat (Single Repeat)
      Repeats the selected music
      -
      X
      Random (All Track Random)
      Plays all the music in the portable audio device at random.
      -
      X
      Scan (All Track Scan)
      Scans all the music in the portable audio device.
      -
      X
      Music Information
      Shows track number*, play time*, track name, artist name, and album name.
      -
      X
      Remaining Battery Level
      Shows the remaining battery level of the Bluetooth audio player.
      -
      X

      1. X: Usable
      2. -: Unusable
      3. *: Models with navigation receiver assembly

    3. Other functions are as follows:

      Function
      Outline
      Set Bluetooth Audio Player
      Registering a Bluetooth Audio Player
      In order to use Bluetooth audio system of a Bluetooth audio player, it is necessary to register it in the audio head unit. Once a Bluetooth audio player is registered, the Bluetooth audio system becomes available automatically. The user can register up to 2 Bluetooth audio players.
      Deleting a Bluetooth Audio Player
      The user can delete a Bluetooth audio player.
      Connecting a Bluetooth Audio Player
      Enables the user to select whether to connect to the Bluetooth audio player automatically or manually. If the Bluetooth audio player has been registered and the automatic connection is enabled, the Bluetooth audio player will be connected automatically.
      Change Settings of Bluetooth Audio
      Selecting a Bluetooth Audio Player
      If the user has registered a second Bluetooth audio player, either one can be selected for connection.
      Displaying Bluetooth Audio Player
      The user can view the information of the Bluetooth audio player on the system.
      Changing the Connection Method
      Enables the user to select the connection method. With this function, the user determines whether to make a connection from the audio head unit to the Bluetooth audio player or from the Bluetooth audio player to the audio head unit.
      Displaying the Bluetooth Audio Setting
      The user can see the Bluetooth audio information settings on the system.
      Changing the Device Name or Passcode
      The user can change a device name or a passcode.
      Initializing the Bluetooth audio settings
      The user initializes the settings.

  2. Bluetooth Hands-free System

    1. The Bluetooth hands-free system has the functions as following table:

      Function
      Outline
      Audio Head Unit
      Radio Receiver Assembly
      DVD Navigation Receiver Assembly
      HDD Navigation Receiver Assembly
      Call with Bluetooth Phone
      By Dial
      The user can call by inputting a telephone number.
      -
      X
      X
      By Phonebook
      The user can call by using the phonebook data that has been transferred from the user's Bluetooth phone.
      X
      X
      X
      By Call History
      Dialed Number
      The user can call by selecting a previously dialed number.
      X
      X
      X
      Received Call
      The user can call by selecting the telephone number of a received call.
      X
      X
      X
      Missed Call
      The user can call by selecting the telephone number of a missed call. The system remembers up to 10 missed call numbers. If more than 10 calls have been missed, the oldest number will no longer be remembered.
      -
      -
      X
      All Call History
      The user can call by selecting the telephone number from all call history. However, the user can any use the last 5 numbers while driving.
      -
      -
      X
      By Speed Dial*
      The user can call by using registered telephone numbers selected from the phonebook, dialed numbers and received calls.
      X
      X
      X
      By Voice Recognition
      Dialing by Name
      The user can call by giving a voice tag and dialing a registered phone number.
      X
      X
      X
      Dialing by Phone Number
      The user can call by giving a desired number
      X
      X
      X
      By Point Of Interest (POI) Call
      The user can call by operating the off hook button when a phone number and an off hook button is displayed on the screen of the navigation system.
      -
      X
      X
      Receive with Bluetooth Phone
      When a call is received, the receive screen is displayed with a ring tone.
      X
      X
      X
      Talk on Bluetooth Phone
      While the user is talking on the phone, the talking screen is displayed.
      X
      X
      X
      Interrupt call:
      1. While talking on the phone, this screen is displayed if the call is interrupted by a third party. At this time, the user can push the offhook switch to start talking with the other party or push the onhook switch to refuse the call.
        1. Some phones may release all calls
        2. If a Bluetooth phone does not support interrupt call and Hands-Free Profile (HFP) version 1.5, this function is not available
      -
      -
      X
      Tone sending:
      The user can send a tone to operate an answering machine or use a telephone service for example in a bank.
      -
      X
      X
      Change Settings of Bluetooth Phone
      Registering Speed Dial
      The user can register the desired telephone number from the phonebook, dialed numbers or received calls.
      X
      X
      X
      Editing Speed Dial
      The user can edit the speed dial.
      -
      -
      X
      Deleting Speed Dial
      The user can delete the speed dials individually or all at once.
      X
      X
      X
      Registering Speed Tone
      The user can register desired tone numbers.
      -
      X
      -
      Editing Speed Tone
      The user can edit the speed tone.
      -
      X
      -
      Deleting Speed Tone
      The user can delete the speed tone individually or all at once.
      -
      X
      -
      Setting Volume
      The user can set the volume.
      X
      X
      X
      1. Automatic volume setting for high speed:
        1. When the vehicle speed is over 80 km/h (50 mph), the volume automatically increases by 3 dB from the volume set by the user.
        2. When the vehicle speed decreases to 70 km/h (44 mph) or lower, the volume returns to the previous volume setting.
      X
      X
      X
      Initializing the settings:
      The user can initialize the settings.
      X
      X
      X
      Setting Screen
      Receiving call display:
      The user can select the method of the receiving call display.
      -
      X
      X
      Bluetooth connection status at start up:
      When the user turns the power switch to on (ACC) or on (IG) and the Bluetooth is automatically connected, the connection check is displayed.
      -
      X
      X
      Auto answer:
      When a call is received, the display automatically changes to the talking screen and the user can start to talk on the phone (without touching any switches) after a preset time
      -
      X
      X
      Initializing the settings:
      The user can initialize the settings
      -
      X
      X
      Change Settings of Bluetooth Phone
      Setting Phonebook
      Transferring a telephone number:
      The user can transfer the telephone numbers from the registered Bluetooth phone to the system.
      X
      X
      X
      Registering the phonebook data:
      The user can register the phonebook data.
      X
      X
      X
      Editing the name:
      When the user does not input the name, the number is displayed.
      X
      X
      X
      Editing a phone number:
      The user can register a phone number in "TEL1" and "TEL2" separately. Up to 2 numbers per phonebook entry can be registered.
      -
      X
      X
      Setting a voice tag:
      The user can set a voice tag.
      X
      X
      X
      Adding data to the phonebook:
      The user can add data to the phonebook.
      X
      X
      X
      Editing the phonebook data:
      The user can edit the registered data.
      X
      X
      X
      Deleting the phonebook data:
      The user can delete the data individually or all at once.
      X
      X
      X
      Deleting the call history:
      The user can delete the log data individually or all at once.
      X
      X
      X
      Selecting an icon:
      The user can select the desired icon.
      -
      X
      X
      Selecting the group:
      The user can set a group for a contact. It will then be easier for the user to find this contact when needed, by using the grouping display.
      -
      X
      -
      Registering a group name:
      The user can register group name.
      -
      X
      -
      Editing a group name:
      The user can input the name with the software keyboard.
      -
      X
      -
      Deleting a group name:
      The user can delete the group names individually or all at once.
      -
      X
      -
      Setting Security
      By setting the security, the user can prevent people from using some hands-free functions. It is useful when the user leaves their vehicle at a hotel or valet parking or the user doesn't want others to see the data that the user has registered.
      X
      X
      X
      Changing the security code:
      The security code is 4 digits and the default is "0000" . A code should be selected that is hard for other people to guess.
      X
      X
      X
      Phonebook lock:
      The user sets the phonebook lock.
      X
      X
      X
      Initializing the settings:
      The user can initialize the settings.
      X
      X
      X
      Set Bluetooth
      Enter Bluetooth Phone
      In order to use the hands-free function of a Bluetooth phone, it is necessary to register it in the audio head unit. Once a phone is registered, the hands-free function becomes available automatically.
      X
      X
      X
      Selecting Bluetooth Phone
      1. When 2 or more registered Bluetooth phones are in the cabin, it is necessary to select which phone to use to prevent the lines from being crossed. Only the selected phone is available for use as a hands-free phone.
        1. The phone registered last is automatically selected.
      -
      X
      X
      Setting Automatic Connection
      The user can set the automatic connection on/off.
      -
      X
      X
      Indicate and Change Bluetooth Information
      The user can set, change and initialize the information of the Bluetooth phone displayed on the screen.
      -
      X
      X
      Bluetooth Information
      Bluetooth phone displayed on the screen.
      X
      X
      X
      Deleting Bluetooth Phone
      A registered Bluetooth phone can be deleted from the audio head unit.
      X
      X
      X

      1. X: Available
      2. -: Not Available

      HINT:
      *: Can be operated while driving