AXLE SYSTEM > GENERAL



OUTLINE


  1. Front Axle

    1. Compact and highly rigid double-row angular ball bearings are used on the front axle. The double-row angular ball bearings and the axle hub have been integrated to ensure high rigidity, thus offering excellent driving stability and braking stability.

    2. A 12-point lock nut is used for the front axle shaft nut. Secure and solid fastening is achieved by staking the nut. Once removed, this nut cannot be reused.

    3. Aluminum steering knuckles are used to achieve weight reduction.



    4. Due to an active type speed sensor being adopted, a sensor rotor is provided on the hub bearing inner race.


      X101578E01


      Text in Illustration 
      *1
      Front Axle Hub Sub-assembly
      *2
      Double-row Angular Ball Bearing
      *3
      Front Axle Shaft Nut
      *4
      Steering Knuckle
      *5
      Sensor Rotor
      -
      -

      NOTICE:
      1. Do not place magnetized objects close to the surface of the sensor rotor.
      2. Do not allow any iron particles, iron sand, dust, debris, or oil to come in contact with the surface of the sensor rotor.



  2. Rear Axle

    1. Compact and highly rigid double-row angular ball bearings are used on the rear axle. The double-row angular ball bearings and the axle hub have been integrated to ensure high rigidity, thus achieving excellent driving stability and braking stability.



    2. Due to an active type speed sensor being adopted, a sensor rotor is provided on the hub bearing inner race.


      X101579E01


      Text in Illustration 
      *1
      Rear Axle Hub and Bearing Assembly
      *2
      Double-row Angular Ball Bearing
      *3
      Sensor Rotor
      -
      -

      NOTICE:
      1. Do not place magnetized objects close to the surface of the sensor rotor.
      2. Do not allow any iron particles, iron sand, dust, debris, or oil to come in contact with the surface of the sensor rotor.