INTAKE SYSTEM > DETAILS



CONSTRUCTION


  1. Air Cleaner



    1. A resonator has been provided to reduce air intake noise, improving the quietness further.


      W105855E01


      Text in Illustration 
      *1
      Air Cleaner Cap
      *2
      Air Cleaner Filter Element
      *3
      Intake Air Resonator
      *4
      Air Cleaner Case



  2. Throttle Body

    1. A link-less type throttle body in which the throttle control motor and the throttle position sensor are integrated is used. It realizes excellent throttle valve control.



    2. In the throttle control motor, a DC motor with excellent response and minimal power consumption is used. The ECM performs the duty ratio control of the direction and the amperage of the current that flows to the throttle control motor in order to regulate the throttle valve angle.


      W101512E04


      Text in Illustration 
      *1
      Throttle Control Motor
      *2
      Throttle Position Sensor
      *3
      Throttle Valve
      *4
      Return Spring



  3. Intake Manifold

    1. The intake manifold has been made of plastic to reduce the weight and the amount of heat transferred from the cylinder head. As a result, it has become possible to reduce the intake air temperature and realize the high intake volumetric efficiency.



    2. The EGR chamber is built into the intake manifold in order to uniformly distribute EGR gases into the cylinders.


      W101563E02


      Text in Illustration 
      *1
      Intake Manifold
      *2
      EGR Port
      *3
      PCV Port
      *4
      Purge Port
      *5
      EGR Chamber
      -
      -