SEAT ASSEMBLY > GENERAL



OUTLINE
  1. Manually adjustable front seats have been provided.

  2. The driver seat uses a manual lifter.

  3. The driver seat uses a power lumbar support.

  4. The active headrest mechanism is used in the front seat headrest.

  5. Foldable 60/40 separate type seats are provided as the rear seats.

  6. A Child Restraint System (CRS) has been provided on the rear seat.

  7. Fabric, and high grade fabric and leather seat covers have been provided.

  8. An ecological plastic* is used for the driver seat cushion pad, contributing to environmental protection. For details, refer to the introduction.

    HINT:
    *: The ecological plastic material is manufactured by mixing mineral oil and plant oil, which decreases the amount of mineral oil used, reducing the environmental load.