MONITOR SYSTEM > DETAILS



FUNCTION OF MAIN COMPONENTS
  1. The main components in the monitor system have the following functions:

    Component
    Function
    Rear Television Camera Assembly
    Captures images of the area behind the vehicle and outputs video signals to the radio and display receiver assembly.
    Radio and Display Receiver Assembly
    Displays the image of the area behind the vehicle from the rear television camera assembly.
    Power Management Control ECU
    Sends a reverse signal to the No. 1 integration relay.
    No. 1 Integration Relay
    Sends the reverse signal from the power management control ECU to the radio and display receiver assembly.


OPERATING CONDITION
  1. This system operates when all the conditions given below have been met:

    Operating Condition
    1. Power switch is on (IG).
    2. Reverse (R) has been selected.


FUNCTION


  1. Area Displayed on screen

    1. On the display, objects on the right of the vehicle appear on the right side of the display panel, and objects on the left of the vehicle appear on the left side of the display panel.



    2. The television camera uses a wide-angle lens. The perceived distance from images that appear on the screen differs from the actual distance.


      Y113308

      NOTICE:
      The area displayed on the screen may vary according to vehicle status or road conditions. The area covered by the rear television camera assembly is limited. The rear television camera assembly does not show objects close to either corner of the bumper or show the area under the bumper.

  2. Warning Message

    1. A warning message appears at the bottom of the screen under the following conditions. The warning message appears in the same language that has been selected by the language selector of the multi-display.

      Messages Appearing at Bottom of Screen 
      Warning Message
      Outline
      Check surroundings for safety.
      This message always appears during system operation.


CONSTRUCTION


  1. Rear Television Camera Assembly



    1. The rear television camera assembly consists of a wide-angle lens and a Charge Coupled Device (CCD) camera.


      Y103098E01


      Text in Illustration 
      *1
      Wide-angle Lens
      -
      -



  2. Multi-display (Rear View Monitor Display)



    1. In rear view monitor mode, the image of the area behind the vehicle captured from the rear television camera assembly is displayed on the radio and display receiver assembly.


      Y111464E01


      Item
      Description
      *1
      Warning Message Display Area
      Area where warning messages are displayed.


FAIL-SAFE
  1. The table below indicates malfunction detection items for the rear view monitor system.

    Malfunctioning Parts
    Detection Item
    Function
    Rear Television Camera Assembly
    Transmission of rear television camera assembly malfunction signal
    Stop signal reception and displays a dark screen


DIAGNOSIS
  1. The radio and display receiver assembly is equipped with a diagnosis function which can display a diagnosis menu for the rear view monitor system. For details, refer to the Repair Manual.