LIGHTING SYSTEM > DETAILS |
| FUNCTION |
Illuminated entry control function
When any one of the following conditions is satisfied, the illuminated entry system turns on the personal light assembly, No.1 room light assembly, footwell light and power switch illumination.
When any one of the following conditions is satisfied, these lights will fade out (in approximately 1 second).
Customize parameters can be configured by means of the customized body electronics system.
Battery saving function
A battery saving function is used to automatically turn the room light and power switch illumination off when the following condition occurs continuously for over 20 minutes: the power switch is off when any door is either ajar or open.