LIGHTING SYSTEM > GENERAL



OUTLINE
  1. Exterior Light

    1. The exterior lights are positioned to ensure visibility.

  2. LED Headlight System

    1. LED headlight system, capable of instantly flashing, and of ensuring a long service life, is used in the low beam headlight.



  3. Automatic Headlight Beam Level Control System



    1. When the headlights are on, the automatic headlight beam level control system operates the headlight leveling motor in accordance with movement of the vehicle.


      Y101951



  4. Manual Headlight Beam Level Control System



    1. This system keeps the beam of the headlight adjusted to the appropriate level in accordance with the number (weight) of passengers and volume of luggage. The headlight beam level can be adjusted from 0 to 5 by operating the headlight leveling switch.


      Y101952E01


      Text in Illustration 
      *1
      Headlight Leveling Switch
      -
      -

  5. Automatic Light Control System

    1. When the light control switch is in the AUTO position, the automatic light control system detects ambient light levels and controls the headlights and taillights (clearance lights, taillights and license plate lights).

  6. Light Auto Turn-OFF System

    1. A light automatic turn-off system, which automatically turns off the headlights and front foglights if the power switch is turned off with the lights turned on, is used in order to prevent the battery from being discharged. When the light control switch is in the AUTO position, all exterior lights will be turned off.

  7. Daytime Running Light System

    1. The daytime running light system is designed to automatically illuminate the headlights (Low beam) and taillights, during the daytime to keep the vehicle highly visible to other vehicles.

  8. Light Reminder System

    1. When the driver door is opened with either the headlights or the taillights turned on when the power switch is turned off, the buzzer sounds to prevent the driver from forgetting to turn off the lights.

  9. Emergency Brake Signal

    1. An emergency brake signal is used. This function automatically flashes the stop lights in 4 Hz cycles during sudden braking, in order to alert vehicles behind and reduce the risk of an accident.


SPECIFICATION

Light
Type
Specification
Headlight Unit
High Beam (Reflector Type)
Halogen Bulb
60W
Low Beam (Projector Type)
Halogen Bulb
55W
Low Beam (LED Type)*
Projector Type
LED X 2
20.2W (10.1W X 2)
Parabolic Cylinder Type
LED X 1
10.1W
Clearance Light
Bulb
5W
Front Turn Signal Light
Bulb
21W
Side Turn Signal Light
LED X 3
1.4W
Front Foglights
Halogen Bulb
55W
Rear Combination Light
Tail and Stop Light
LED X 12
0.5W/5.4W
Turn Signal Light
Bulb
21W
Back-up Light
Bulb
21W
Rear Foglight
Bulb
21W
Center Stop Light
LED X 4
0.4W
License Plate Lights
Bulb
5W
  1. *: Models with LED headlight system