POWER SEAT CONTROL SYSTEM > GENERAL



OUTLINE
  1. Front Power Seat

    1. A power seat control system is used for the drive seat.

    2. The user can perform slide, reclining, front vertical, seat lifter and lumbar support adjustments by operating the front power seat switch and lumbar support switch.


MAJOR DIFFERENCE
  1. The new models have been modified from the previous models as shown below:

    1. The power seat control system has been added.


SPECIFICATION


  1. The power seat system for the driver seat has the following functions:


    Y115258E01


    Adjustment Function
    Stroke
    No.
    Item
    (1)
    Seat Slide
    260 mm (10.2 in.)
    (2)
    Seat Reclining
    74 degrees
    (3)
    Front Vertical
    32 mm (1.3 in.)
    (4)
    Seat Lifter
    60 mm (2.4 in.)
    (5)
    Lumbar Support
    30 mm (1.2 in.)