FRONT LOWER SUSPENSION ARM > INSTALLATION |
| 1. TEMPORARILY TIGHTEN FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY RH |
| 2. TEMPORARILY TIGHTEN FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY LH |
![]() |
Temporarily install the front No. 1 lower suspension arm LH to the front suspension crossmember with the 2 bolts and nut.
| 3. CONNECT FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY LH |
![]() |
Install the front No. 1 lower suspension arm sub-assembly to the front lower ball joint with the bolt and 2 nuts.
| 4. INSTALL FRONT WHEELS |
| 5. STABILIZE SUSPENSION |
Lower the vehicle.
Press down on the vehicle several times to stabilize the suspension.
| 6. FULLY TIGHTEN FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY LH |
![]() |
Fully tighten the bolt A and B.
| 7. INSTALL NO. 1 ENGINE UNDER COVER |
| 8. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT |