Home › Suspension › FRONT SUSPENSION › FRONT LOWER SUSPENSION ARM

FRONT LOWER SUSPENSION ARM > REMOVAL

for Preparation Click here



1. REMOVE FRONT WHEELS


2. REMOVE NO. 1 ENGINE UNDER COVER


3. SEPARATE FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY LH


    C205578
  1. Remove the bolt and 2 nuts, and separate the front No. 1 lower suspension arm sub-assembly from the front lower ball joint.



4. REMOVE FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY LH


    C205613
  1. Remove the 2 bolts, nut, and front No. 1 lower suspension arm sub-assembly LH from the front suspension member.

    NOTICE:
    Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.



5. REMOVE FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY RH

HINT:
Refer to the procedure up to Remove Front No. 1 Lower Suspension Arm Sub-assembly RH .