Home › Suspension › FRONT SUSPENSION › FRONT STABILIZER BAR

FRONT STABILIZER BAR > REMOVAL

for Preparation Click here



1. REMOVE FRONT WHEELS


2. REMOVE NO. 1 ENGINE UNDER COVER


3. REMOVE NO. 2 ENGINE UNDER COVER


4. REMOVE FRONT STABILIZER LINK ASSEMBLY LH


    C206991E01
  1. Remove the 2 nuts and front stabilizer link assembly LH.
    Text in Illustration 
    *1
    Upper Side
    *2
    Lower Side

    HINT:
    If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud bolt.



5. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

HINT:
Perform the same procedure as for the LH side.



6. SEPARATE FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY LH


    C205578
  1. Remove the bolt and 2 nuts, and separate the front No. 1 lower suspension arm sub-assembly from the front lower ball joint.



7. REMOVE FRONT NO. 1 LOWER SUSPENSION ARM SUB-ASSEMBLY LH


    C205613
  1. Remove the 2 bolts, nut, and front No. 1 lower suspension arm sub-assembly LH from the front suspension member.

    NOTICE:
    Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.



8. REMOVE FRONT SUSPENSION MEMBER FRONT BRACE LH


    C205605
  1. Remove the 4 bolts and front suspension member front brace LH.



9. REMOVE FRONT SUSPENSION MEMBER FRONT BRACE RH

HINT:
Perform the same procedure as for the LH side.



10. REMOVE FRONT STABILIZER BAR


    C206985
  1. Remove the front stabilizer bar with front stabilizer bar bushing from the front suspension crossmember sub-assembly.



11. REMOVE FRONT STABILIZER BAR BUSHING LH


    C153812
  1. Remove the front stabilizer bar bushing LH from the front stabilizer bar.



12. REMOVE FRONT STABILIZER BAR BUSHING RH

HINT:
Perform the same procedure as for the LH side.