Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for Navigation Receiver Type)

NAVIGATION SYSTEM (for Navigation Receiver Type) > Disc cannot be Ejected

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK OPERATION
  1. Press the disc eject switch of the navigation ECU sub-assembly for 5 seconds or more and check that the disc is ejected.

    OK:
    Disc is ejected.



NG
REPLACE NAVIGATION ECU SUB-ASSEMBLY (Click here)
OK


2.REPLACE DISC AND RECHECK
  1. Replace the disc with a known good one and check that the malfunction disappears.

    OK:
    Disc is ejected.



NG
REPLACE NAVIGATION ECU SUB-ASSEMBLY (Click here)
OK

DISC WAS FAULTY